Saturday, August 29, 2009

gambar motor BMW HP2 Sport

Gambar Motor BMW

BMW HP2 Sport (2008)

Klik gambar untuk download ukuran 1600 x 1200

BMW HP2 Sport
General information

Model: BMW HP2 Sport
Year: 2008
Category: Sport
Rating: 68.3 out of 100.

Engine and transmission
Displacement: 1170.00 ccm (71.39 cubic inches)
Engine type: Two cylinder boxer
Stroke: 2
Power: 131.42 HP (95.9 kW)) @ 8750 RPM
Torque: 115.00 Nm (11.7 kgf-m or 84.8 ft.lbs) @ 6000 RPM
Compression: 12.5:1
Bore x stroke: 101.0 x 73.0 mm (4.0 x 2.9 inches)
Fuel system: Injection. Electronic intake pipe injection / BMS-K digital engine management with overrun fuel cut-off, single-spark ignition
Valves per cylinder: 4
Starter: Electric
Cooling system: Oil & air
Gearbox: 6-speed

Transmission type
final drive: Shaft drive (cardan)
Clutch: Single dry plate clutch, hydraulically operated

Physical measures
Dry weight: 178.0 kg (392.4 pounds)
Weight incl. oil, gas, etc: 199.0 kg (438.7 pounds)
Seat height: 830 mm (32.7 inches) If adjustable, lowest setting.
Overall length: 2,135 mm (84.1 inches)
Overall width: 750 mm (29.5 inches)
Wheelbase: 1,485 mm (58.5 inches)

Chassis and dimensions
Frame type: Tubular steel space frame, front and rear made of self-supporting carbon
Rake (fork angle): 24.0°
Trail: 86 mm (3.4 inches)
Front suspension: Telelever, spring pre-load continuously variable, compression damping, rebound damping and vehicle height adjustable
Front suspension travel: 105 mm (4.1 inches)
Rear suspension: EVO Paralever, Öhlins central spring strut, spring pre-load continuously adjustable, rebound and compression damping adjustable, vehicle height adjustable
Rear suspension travel: 120 mm (4.7 inches)
Front tyre dimensions: 120/70-17
Rear tyre dimensions: 190/55-17
Front brakes: Double disc
Front brakes diameter: 320 mm (12.6 inches)
Rear brakes: Single disc
Rear brakes diameter: 265 mm (10.4 inches)

Speed and acceleration
Power/weight ratio: 0.7383 HP/kg

Other specifications
Fuel capacity: 16.00 litres (4.23 gallons)
Reserve fuel capacity: 2.00 litres (0.53 gallons)

Motorcycle Insurance Info

Who will provide physical damage insurance coverage for custom built motorcycles?

Safeco insures a full spectrum of motorcycles from street cycles, Harley Davidsons, cruisers and touring bikes to dirt bikes and ATVs. If you select custom parts coverage, you will receive up to $3,000 in coverage without any additional cost to you. Coverage is available for up to $10,000 in custom parts and equipment. (

Progressive - Motorcycle coverage - when you purchase Comprehensive or Collision coverage, at least $1,000 of Custom Parts and Equipment (CPE)/Accessory coverage - Custom paint, custom plating or custom exhaust is included in most states. Additional CPE coverage can be purchased to cover equipment, up to $30,000 in value.


No comments:

Post a Comment